Double-thick bottom Reinforced handles Capacity: 50 liters Suitable for up to 40 kg Best tested in 2020 and 2021

Capacity: 63 liters Load capacity: 50 kg Fully sealed bottom – no risk of tearing Stackable up to 5 boxes

Specifically designed for transporting or storing your archive or books Fits 5–7 binders Tumbling flap Capacity: 40 liters Load capacity: 50 kg

If necessary, disconnect the battery from the vehicle by first disconnecting the negative terminal (black) and then the positive terminal (red). Attach the desired connector (clamps or ring terminals) to the quick connector of the charger. Connect the red clamp or red ring terminal to the red (positive) terminal, and the black clamp or black ring terminal to the negative (black) terminal of the battery (or the vehicle chassis—refer to your vehicle’s manual for guidance). Plug the charger into the mains power outlet. If the charger is not connected correctly, the warning LED will light up.

Unplug the charger from the mains outlet. Remove the black connection from the negative (black) terminal of the battery. Remove the red connection from the positive (red) terminal.

For a smooth move

Manuals

Q: Set up in 10 quick steps

Attention: Follow the steps in the manual carefully to use the moving box correctly. If the flaps are not folded properly, the box will be less sturdy and more likely to tear. Tear open the small flaps and fold the box along the lines. Fold the bottom without flaps inward. Fold the bottom with flaps inward (flaps on the inside). Stand the box upright. Fold the short flaps to the sides. Fold the bottom (without flaps) back. The box now has a double bottom (!). Fold the top flaps of the box inward. Fold the side handles inward (your box now has handles ). Pack your items and close the top.

Q: Set up in 4 quick steps

Attention: Follow the steps in the manual (or video) carefully for proper use of the moving box. If the flaps are not folded correctly, the box will be less sturdy and more likely to tear. Assemble the box with the autolock bottom and press the bottom firmly. Fold the three flaps inward. Push the handles from the outside inward (for extra strength). Fold the edges of the tumbling flap.

Find your nearest storage space

53 locations, always nearby!

You have to put in a value before you can search

Moving Boxes

At ALLSAFE, you can shop for a variety of moving boxes. They are easy to assemble. Want to make sure you’ve done it correctly or need a little guidance? Check out the manuals below to make your move even easier.

Moving box large

Set up in 10 quick steps

Attention: Follow the steps in the manual carefully to use the moving box correctly. If the flaps are not folded properly, the box will be less sturdy and more likely to tear.

Tear open the small flaps and fold the box along the lines.
Fold the bottom without flaps inward.
Fold the bottom with flaps inward (flaps on the inside).
Stand the box upright.
Fold the short flaps to the sides.
Fold the bottom (without flaps) back. The box now has a double bottom (!).
Fold the top flaps of the box inward.
Fold the side handles inward (your box now has handles).
Pack your items and close the top.

Specifications

Double-thick bottom
Reinforced handles
Capacity: 50 liters
Suitable for up to 40 kg
Best tested in 2020 and 2021

Moving box XL

Specifications

Capacity: 63 liters
Load capacity: 50 kg
Fully sealed bottom – no risk of tearing
Stackable up to 5 boxes

Archive box / Moving box medium

Set up in 4 quick steps

Attention: Follow the steps in the manual (or video) carefully for proper use of the moving box. If the flaps are not folded correctly, the box will be less sturdy and more likely to tear.

Assemble the box with the autolock bottom and press the bottom firmly.
Fold the three flaps inward.
Push the handles from the outside inward (for extra strength).
Fold the edges of the tumbling flap.

Specifications

Specifically designed for transporting or storing your archive or books

Fits 5–7 binders
Tumbling flap
Capacity: 40 liters
Load capacity: 50 kg

Battery Charger

At ALLSAFE, you can also get a battery charger. This ensures that your car or motorcycle battery stays in good condition while it is in storage. The ALLSAFE Battery Charger is a 7-step charger for car and motorcycle batteries, suitable for both 6V and 12V lead-acid batteries of the WET, AGM, and GEL types. The charger is not suitable for lithium-ion batteries and is designed for non-commercial use in a closed environment.

Read the shortened step-by-step guide below, or download the manual here: Battery Charger Manual (PDF)

Battery charger

Connecting

If necessary, disconnect the battery from the vehicle by first disconnecting the negative terminal (black) and then the positive terminal (red).
Attach the desired connector (clamps or ring terminals) to the quick connector of the charger.
Connect the red clamp or red ring terminal to the red (positive) terminal, and the black clamp or black ring terminal to the negative (black) terminal of the battery (or the vehicle chassis—refer to your vehicle’s manual for guidance).
Plug the charger into the mains power outlet.
If the charger is not connected correctly, the warning LED will light up.

Disconnecting

Unplug the charger from the mains outlet.
Remove the black connection from the negative (black) terminal of the battery.
Remove the red connection from the positive (red) terminal.